Rental Protection is toolshare's coverage programme for peer-to-peer tool and equipment rentals. Listers who require Rental Protection on their listing are covered on every booking of that item for documented damage, theft, or non-return, after the security deposit, up to the lower of the declared replacement value and $5,000, where $5,000 is the limit for the booking as a whole and not for each item in it, subject to the conditions below. Where the lister has not required it, renters can add it at checkout. On every protected rental, the app requires timestamped photos from both parties at handoff and at return.
What Is Covered
When an item is damaged, stolen, or not returned during a rental where Rental Protection is in force, Rental Protection may cover the lister for the documented cost of repair or replacement. Coverage is applied after the security deposit, up to the lower of the declared replacement value and $5,000, where $5,000 is the limit for the booking as a whole and not for each item in it. Coverage is subject to the conditions set out in this policy.
Rental Protection is in force on a rental in two cases: the lister has required it on the listing, in which case it applies to every booking of that item, or the lister has not required it and the renter adds it at checkout. A listing with a declared replacement value that does not require protection is eligible only. If the renter does not add protection to that booking, the rental is not covered. Where a lister turns on the requirement after a booking has been made, it applies only to bookings made after that point. Whether Rental Protection is in force on a booking, and the coverage limit that applies to it, are fixed when the booking is paid for.
On any rental where Rental Protection is in force, the renter's liability for accidental damage or loss is limited to the security deposit authorized at handoff. Where no deposit was required, liability for accidental damage or loss is nil. This limitation does not apply to theft or conversion by the renter, intentional non-return, fraud, misrepresentation, or any criminal or unlawful use of the rented item. toolshare's full authorization under section 12 of the Terms of Service applies to such claims regardless of whether Rental Protection was in force.
How listers get covered: set a declared replacement value on your listing and require Rental Protection. That is the only way to make sure Rental Protection is in force on every booking of your item. Claims are still subject to the conditions and exclusions in this policy. You can do both when you list an item. Setting a declared value without requiring protection makes the listing eligible, and renters can then choose whether to add it at checkout.
What Is Not Covered
The following are excluded from coverage:
- Normal wear and tear.
- Damage that was already present and visible in the handoff photos taken at the start of the rental.
- Lost rental income or other indirect losses.
- Damage resulting from use outside what your listing described, unless that use was explicitly restricted at the time of booking.
- Claims submitted without documentation, or reported outside the required time windows.
- Claims involving fraud or misrepresentation by the lister, including damage caused or staged by the lister, or a declared replacement value materially above the item's actual value.
How the Deposit and Protection Stack
Security deposit (set by the lister): held as an authorization on the renter's card at handoff, not at booking. Released automatically when the rental ends with no damage claim. No funds are captured unless a claim is filed.
Rental Protection (required by the lister on the listing, or added by the renter at checkout): applied after the security deposit. Where a claim is approved, the deposit is applied first, and Rental Protection covers the remaining documented cost of damage, theft, or non-return, up to the lower of the declared replacement value and $5,000 for the booking as a whole. For the renter, Rental Protection limits liability for accidental damage or loss to the security deposit authorized at handoff, or to nil where no deposit was required. This limit does not apply to theft or conversion by the renter, intentional non-return, fraud, misrepresentation, or any criminal or unlawful use of the rented item.
Where Rental Protection is not in force (the lister did not require it and the renter did not add it): Rental Protection coverage does not apply. The security deposit and the renter's liability under the Terms of Service still apply.
What It Costs
If the lister requires Rental Protection on a listing, the fee is included in the displayed price of every booking of that item. Where the lister has not required it, protection is optional and the renter can add it at checkout.
The protection fee is the greater of:
- 14% of the rental subtotal, or
- 0.1% of the covered value per rental day (the covered value is the lower of the item's declared replacement value and $5,000; for a booking of several items, their combined declared value up to $5,000)
The exact amount is shown before payment is confirmed. If a protected rental is extended, the fee for the added days is charged with the extension on the same basis.
If a booking is declined, or cancelled by either party before the scheduled pickup time, everything paid is refunded in full, including the protection fee. If a booking is cancelled because the renter did not pick up the item, the protection fee is refunded in full and the rest of the booking is refunded in part.
Lister Responsibilities
To submit a valid claim, you must meet all of the following:
- Take photos of the item at handoff and at return. On every rental where Rental Protection is in force, the app requires these photos before you can confirm either step, so they cannot be skipped.
- Report damage within 24 hours of the rental's scheduled end time.
- Report a non-return promptly, once it is apparent, after making a reasonable attempt to contact the renter directly.
- Get approval from toolshare before paying for any repair or replacement.
- Take reasonable steps to prevent further loss once you are aware of an issue.
- Provide supporting documentation, including a police report for theft or non-return claims where applicable.
Renter Responsibilities
On any rental where Rental Protection is in force, the renter must:
- Take photos of the item at handoff and at return. The app requires these photos before the renter can confirm pickup or return, so they cannot be skipped.
- Respond to any claim made against them within 48 hours of being notified of it.
How Claims Are Reviewed
Submit your claim through toolshare's dispute process with item details and supporting evidence. Claims are assessed against the handoff and return photos taken in the app as the primary evidence. toolshare timestamps and stores these photos. toolshare may require evidence of an item's value, such as a purchase receipt or serial number, before paying a claim. Claims are acknowledged within one business day. Straightforward claims are resolved within three business days. All decisions are made at toolshare's discretion, based on the evidence provided.
If a claim is filed against a renter, that renter has 48 hours from notification of the claim to submit their account of events before a determination is made.
Frequently Asked Questions
What happens if someone damages my rented equipment?
If Rental Protection is in force on the rental, because you required it on your listing or the renter added it at checkout, it may cover the documented cost of repair or replacement after the security deposit is applied, up to the lower of the declared replacement value and $5,000 for the booking as a whole. Report the damage through toolshare's dispute process within 24 hours of the rental's scheduled end time. The claim is assessed against the handoff and return photos taken in the app, and it is acknowledged within one business day.
Is it safe to rent out my tools?
The safest way to list is to set a declared replacement value and require Rental Protection on your listing. Rental Protection is then in force on every booking of that item, covering documented damage, theft, or non-return after any security deposit you set, up to the lower of the declared replacement value and $5,000 for the booking as a whole, subject to the conditions and exclusions in this policy. On every protected rental, the app requires both you and the renter to take photos of the item at handoff and at return before either of you can confirm, and toolshare stores those photos with a timestamp, so there is a record of the item's condition at each step. Before they can book, renters must confirm their email address and verify their phone number by text.
Do I need my own insurance to list on toolshare?
Rental Protection is a contractual protection offered directly by toolshare, not insurance. toolshare is not a licensed insurer. We recommend that listers also review their own property insurance for coverage that may apply to items rented to others.
What is the difference between the security deposit and Rental Protection?
The security deposit is set by the lister and held as an authorization on the renter's card at handoff. It is released automatically at the end of the rental if no damage claim is filed. Rental Protection is applied after the deposit: it covers the lister for the remaining documented cost of damage, theft, or non-return, up to the lower of the declared replacement value and $5,000 for the booking as a whole. For the renter, it limits liability for accidental damage or loss to the deposit authorized at handoff, or to nil where no deposit was required. That limit does not apply to theft or conversion by the renter, intentional non-return, fraud, misrepresentation, or any criminal or unlawful use of the rented item.
How much does Rental Protection cost?
If the lister has required Rental Protection on the listing, the fee is included in the displayed price. Otherwise it is optional and you can add it at checkout. Either way, the fee is the greater of 14% of the rental subtotal or 0.1% of the covered value per rental day (the covered value is the lower of the declared replacement value and $5,000 for the booking as a whole). The exact amount is shown before you confirm payment, and extending a protected rental adds the fee for the extra days. If a booking is declined, or cancelled by either party before the scheduled pickup time, the fee is refunded in full. It is also refunded in full if the booking is cancelled because the renter did not pick up the item.
What is not covered?
Normal wear and tear, damage that was already present and visible in the handoff photos taken at the start of the rental, lost rental income or other indirect losses, damage from use outside what the listing described (unless that use was explicitly restricted at the time of booking), claims submitted without documentation or reported outside the required time windows, and claims involving fraud or misrepresentation by the lister, including damage caused or staged by the lister, or a declared replacement value materially above the item's actual value.
Legal Status
Rental Protection is a contractual protection offered directly by toolshare. It is not insurance, and toolshare is not a licensed insurer. We recommend that listers also review their own property insurance.
toolshare reserves the right to limit, modify, or discontinue the programme at any time. Any change to or discontinuation of this programme applies only to bookings made after the change takes effect. Rental Protection already in force on an existing booking is not affected.